Getting started
www.kodak.com/go/support
3
Connecting the power
RISK OF ELECTRIC SHOCK:
Use only the AC power adapter included with your printer dock. Other adapters or
cords can damage your camera, printer dock, or computer.
1 Make sure your camera is not docked on the printer
dock.
2 Connect the AC power cord to the AC power
adapter, then to the back of the printer dock.
NOTE: The AC power adapter included with your printer dock may
not require assembly and may be different from the one
shown.
3 Connect the AC power adapter into a power outlet.
Purchase an AC power adapter and other
accessories at www.kodak.com/go/accessories.
4 Press the Power button, , to turn on/off the
printer dock.
IMPORTANT:
When traveling, verify that your AC power adapter is compatible in the
region to which you are traveling.
To Next Page
Loading...
