Troubleshooting
www.kodak.com/go/support
43
Printing stops
during mid-print
(paper stops
feeding and
Paper light
glows red)
IMPORTANT:
Use only Kodak color cartridge & paper kits (with
symbol) for your printer dock. Do not use inkjet paper.
■ Check the paper:
1 Remove the paper-tray (page 6).
2 Check the paper slot on the back of the printer dock.
3 Remove loose paper from the printer dock. If paper is jammed, see
page 41.
4 Carefully "fan" the paper to keep the sheets from sticking together.
5 Reload the tray. Do not load more than 30 sheets of paper
(see
upper limit line, , inside tray)
.
6 Re-install the tray, then press to resume printing.
■ Clean the paper-feed rollers (page 39).
Print is smudged
■ Fingerprints may be on glossy side of paper. Handle paper by the edges
(page 2).
Print is spotted
■ Check for dirty paper; wipe paper gently with a dry, lint-free cloth to
remove dirt. For excessive dirt or debris, thoroughly clean the paper-tray,
and load new paper (page 4). Check and clean the paper-feed rollers
(page 39).
NOTE: Keep paper in the original protective wrap and remove and close the paper-tray
and paper-tray door to keep dust and debris from collecting on the paper or
inside the printer dock (page 6).
If... Try the following
To Next Page
Loading...
Need help?
General