Kodak EasyShare G600 User Manual

46 www.kodak.com/go/support
Troubleshooting
Nothing
happens when
you try to print
(from computer)
■ Make sure your computer meets the minimum system requirements.
Upgrade your system, if necessary (see Helpful links, page 55).
■ Check the USB connections from the printer dock to the computer
(page 22).
■ The computer may be transferring pictures. Cancel the transfer (page 32),
then try to print again.
■ Close unnecessary software applications. Disconnect then reconnect the
USB cable from the printer dock to the computer (page 22).
■ Access the printer menu for your system. Remove check marks next to
Pause Printing and Offline, if checked.
■ Install Kodak EasyShare software (page 20). If you choose Custom
installation, make sure to install the printer driver.
■ Uninstall, then reinstall Kodak EasyShare software (page 20).
Printing is slow
NOTE: When printing a large number of prints, printing may slow down to prevent the
print head from overheating.
■ Move the printer dock from direct sunlight; operate in a
temperature-controlled environment.
■ Do not block the cooling vents; keep them clean (page 1).
■ Close unnecessary software applications.
■ Make sure your computer meets the minimum system requirements.
Upgrade your system, if necessary (see Helpful links, page 55).
If... Try the following

Kodak EasyShare G600 Specifications

General

Brand	Kodak
Model	EasyShare G600
Category	Printer
Language	English