A-61550 February 2010 2-3
Attaching the input and
output trays
The input and output trays snap into place. The input and output trays
can also be adjusted to fit different document sizes.
Attaching the input tray
1. Locate the input tray slots on the scanner.
2. Align the input tray pins with the slots.
3. Snap the input tray into place.
Attaching the output tray
1. Locate the output tray slots on the scanner and align the output tray
pins with the slots.
2. Snap the output tray into place.
To Next Page
Loading...
