Kodak i1440 - System Requirements

A-2 A-61550 February 2010
NOTE: The Kodak A3/A4 Flatbed Accessory is not available for the
Kodak i1405 Scanner.
System requirements Following is the recommended system configuration to run Kodak i1400
Series Scanners.
• 3.5 GHz Intel Pentium IV processor with 3 GB of RAM
• USB port 2.0 (compatible with USB 1.1 but at slower speeds)
• 200 MB free hard disk space
• Supported operating systems:
- Microsoft Windows Vista (32-bit); SP1 recommended
- Microsoft Windows Vista SP1 x64 Edition
- Microsoft Windows XP SP2/SP3 (32-bit)
- Microsoft Windows XP x64 Edition SP2
- Microsoft Windows 2003 Server R2 x64 Edition (TWAIN only)
- Linux Ubuntu 6.0.6; 8.04 recommended
- Linux SUSE 10.1; 11 recommended
- Linux Fedora 8; 9 recommended
Included Drivers:
• Windows operating systems: TWAIN, ISIS, WIA
• Linux distributions: TWAIN and SANE
Power Consumption -
Scanner
Sleep mode: <4 watts
Running: <52 watts
Power Consumption -
with A3 Flatbed
Sleep mode: <6 watts
Running: <70 watts
Power Consumption -
with A4 Flatbed
Sleep mode: <
6 watts
Running: <63 watts
Acoustic Noise
(Sound Power level)
Operating: less than 58 dB
Standby: less than 46 dB