Kodak i2800 - Scanning; Getting Your Scanner Ready to Scan

A-61677 December 2013 3-1
3Scanning
Contents Getting your scanner ready to scan................................................3-1
Getting your documents ready to scan ...........................................3-3
Selecting your scanning application ...............................................3-4
Scanning with Smart Touch ............................................................3-5
Getting your scanner
ready to scan
1. Be sure the scanner is on and ready to scan (LED/Start button will
be green and constant).
2. Tilt the scanner.
• Tilt position: Use the scanner
in this position when scanning.
Using both hands, rotate the
scanner body away from you.
When you tilt the scanner, the
output tray will slide out from
underneath the scanner.
• Storage position: Use this
position to store the scanner
when not in use. Rotate the
scanner toward you.