4-12 A-61677 December 2013
Adjusting the pre-
separation roller
tension
If you are experiencing multi-feeds or document jams, it may be
necessary to adjust the pre-separation roller tension.
1. Remove the separation module from the scanner by following the
steps described previously in “Replacing the separation module and
tires”.
2. Locate the spring on the separation module.
3. Lift the spring from the holder and move it to the left or right as
desired to adjust the tension.
4. When finished, reinsert the separation module by aligning the tabs
with the slots and snapping it into position.
Supplies and
consumables
Contact your scanner supplier to order supplies.
NOTE: Items and catalog numbers are subject to change.
Description CAT No.
Kodak Feed Rollers (qty 12) 148 4864
Kodak Separation Module 173 6115
Kodak Feed Module 826 9607
Kodak Digital Science Roller Cleaning Pads (qty 24) 853 5981
Kodak Digital Science Transport Cleaning Sheets (qty 50) 169 0783
Staticide Wipes for Kodak Scanners (qty 6 boxes of 24) 896 5519
Brillianize Detailer Wipes / for Kodak Scanners 826 6488
Kodak Legal Size Flatbed Accessory 119 9470
Kodak White Background Accessory 892 7717
Kodak A3 Size Flatbed Accessory
179 6747
To Next Page
Loading...
