A-61677 December 2013 2-1
2 Installation
Contents Installing the scanner......................................................................2-1
Installing the Kodak Driver Software: Windows operating
systems ....................................................................................2-1
Installing the Kodak Driver Software: Linux operating systems.....2-2
Installing the Kodak Driver Software: Mac computers...................2-2
Connecting the power cord and USB cable...................................2-2
Turning on the scanner ...................................................................2-4
Turning the scanner off ..................................................................2-4
Installing the scanner This section provides detailed information of the Installation Guide that
is provided with your scanner. Follow these steps in the order they are
provided to install your scanner.
NOTE: If you have already performed all of the steps in the Installation
Guide, skip this section.
Installing the Kodak Driver
Software: Windows
operating systems
1. Insert the Kodak i2400/i2600/i2800 Scanners Installation CD in the
CD-ROM drive. The installation program starts automatically.
2. Select Install Scanner Software.
NOTES:
• If the CD does not start automatically, open the My Computer
icon on your desktop. Double-click the icon indicating your CD-
ROM drive, then double-click on setup.exe.
• If the message Portions of this application are already
installed is displayed, click Yes to continue the installation
process. Any previously installed Kodak Scanner software that
is shared with this scanner will be updated.
To Next Page
Loading...
