A-61504 October 2007 3-3
The TWAIN interface is divided into three main sections:
• Image Settings: clicking the Settings button on the main Kodak
Scanner window, displays the Image Settings window. From this
window you can set your image processing parameters by using the
General, Size, Adjustments and Enhancements tabs.
• Device Settings: the Device button is located on the Image Settings
window. From this window you can set all scanner control functions
by using the General, Printer, Multifeed, Patch and OCP tabs.
• Diagnostics: the Diagnostics button is located on the Device
Settings window. From this window you can access diagnostic
functions of the scanner. The Diagnostics window includes the
following tabs: General, Debug and Logs.
To Next Page
Loading...
