18
The KODAK Super 8 Camera can be started and stopped
by one of both integrated Run buttons on the camera
or with the trigger on the pistol grip, once it is
attached and connected.
In addition to that an external Start/Stop button (3rd party
product) can be connected to the backplate of the camera.
There you can ind a 2.5mm jack connector, where
a remote button or an external trigger can be plugged in.
Make sure, that the 2.5mm jack connector is just using
a two phase circuit for start/stop.the external monitor.
Connecting the Camera
with a remote
Getting Started
Depending on the setup for the RUN button at the
CAMERA menu ( “pressed” or ”latched” ) the external
remote is replicating the selected setting.
To Next Page
Loading...
