Kodak Super 8 User Manual

9
IMPORTANT: The camera will NOT work without a battery.
The battery MUST be fully charged BEFORE using the
camera for the irst time.
Use only a genuine KODAK Super 8 Camera Battery.
1. Open the ilm door.
2. Remove the silicone cover from the battery pack
3. Insert the battery and lift and twist the handle clockwise
to lock it into place.
4. Close the ilm door.
Install the Battery
1
3
2
Getting StartedGetting Started
Connect one end of the Micro USB Charging Cable to the
camera and the other end to the USB Power Adapter. Plug
the adapter into a wall outlet.
The camera power button light will turn red when charging
and will turn green when fully charged (about 3.5 hours).
IMPORTANT: Only use the Super 8 Camera USB Power Adapter
supplied with the camera or purchased separately from Kodak.
Your USB power adapter MAY NOT look like the illustration shown
here.
IMPORTANT: Fully charge the battery upon purchase and
before any shoot. Do not store the battery in the camera.
Store batteries in a cool place: 23
o
C ± 5
o
C (73.4
o
F ± 9
o
F,
65% ± 20% RH.
ADDITIONAL INFO:
You should be able to ilm 1012 cartridges within a week on
a fully charged battery, using the default Auto O Mode.
Charge the Battery

Kodak Super 8 Specifications

General

Film Format	Super 8
Lens Mount	Fixed
Viewfinder	Optical
Power Source	Battery
Film Type	Super 8 Cartridge
Frame Rate	18 fps
Exposure Control	Automatic
Battery	AA