For Mac users
1 Double-click the downloaded installer file to mount it.
KODAKVERITECRAFT6xxxx-vxxxxx.dmg
Driver's version
2 The following window will appear.
Double-click on [KODAK-VERITE CRAFT6 Installer.mpkg].
Note(s)
●
If the installer does not start when you double-click
[KODAK-VERITE CRAFT6 Installer.mpkg], please try the
following steps:
1 Select [System Preferences] in the Apple Menu. The Apple
Menu is located on the top left of the screen. Click the Apple
Icon to display the pull-down menu.
2 Click [Security & Privacy].
3 Click the [General] tab and you will see the [Allow
application downloaded from:] option. If the setting is
locked, please unlock it. The Lock Icon is displayed on the
bottom left of the [Security & Privacy] window. Click the
lock Icon to unlock. You may be required to enter the login
password to proceed.
4 Select [Anywhere] from options listed. For more
information, visit our FAQ on the website at -
www.kodakverite.com/support
Install the printer driver to your PC
There are two ways to connect to the unit.
Using Wi-Fi (Recommended)
When your PC finds the unit in your network, this unit's serial number
will appear on the Menu display.
●
Double-click the printer driver installer and select “Wi-Fi
Connect”. If you accept the License Agreement, the installation
of the driver will begin.
Select this unit's serial number to complete the printer driver
installation.
1 Click [Wi-Fi Connect].
2 Click [Agree].
3 The following guidance will appear while the PC is searching
the Network.
19
English
Continued on next page.
To Next Page
Loading...
