Kodak VERITE Craft 6 - Changing Connection from Wi-Fi to USB

5 Click the printer, select the driver from pull-down menu
[Use], then click [Add].
●
Make sure to choose FUNAI KODAK VERITE CRAFT 6 with
[Bonjour Multifunction] in [Kind].
6 Select [FUNAI KODAK VERITE CRAFT 6] added.
Changing connection from Wi-Fi to USB
If you would like to change connection from Wi-Fi to USB, refer to
the following instructions.
Microsoft
®
Windows
®
1 Connect the USB cable between this unit and your PC first.
2 From the Windows® start menu, select [All apps]
> [KODAK
VERITE CRAFT 6] > [Device setting].
3 Click [Printer re-search] in the [Device setting] window.
4 Change the connection type automatically after checking
one of the connections.
Apple Mac OS
1 Connect the USB cable between this unit and your PC first.
2 Activate [System Preferences].
3 Click [Printers & Scanners].
4 Click [+] > [Add Printer or Scanner...].
5 Click the printer, select the driver from pull-down menu
[Use], then click [Add].
●
Make sure to choose FUNAI KODAK VERITE CRAFT 6 with
[USB Multifunction] in [Kind].
6 Select [FUNAI KODAK VERITE CRAFT 6] added.
24
English