Kodak VERITE Craft 6 - Network Status; Connection

Paper Type
1 From the Control panel, navigate to
[Home > Setup > Paper Setup > Paper
Type], then press .
2 Press
to select the [Paper
Type].
●
Plain
●
Labels
●
Envelope
●
Glossy Photo
●
Matte Photo
3 Press
to confirm.
Paper Setup
Paper Size Leer
Back Select
Paper Type Plain
Paper Type
Labels
Envelope
Glossy Photo
Cancel Select
Plain
Network Status
You can check the following settings for the Network/Router
connection status.
Connection
You can confirm Wi-Fi status ([Connected] or [Disconnected]).
1 From the Control panel, navigate to
[Home > Setup > Network Status >
Connection], then press .
2 The Wireless Connection status is
displayed. [Connected] or
[Disconnected] will be shown on the
screen.
Network Status
Signal ality
Security
IP Address
Back
Select
Connection
Connection
Connected
Back
Signal Quality
You can confirm the current Signal Quality for Wi-Fi.
1 From the Control panel, navigate to
[Home > Setup > Network Status >
Signal Quality], then press .
2 The Wireless [Signal Quality] is
displayed. [No Signal] or 8 levels of
signal will be shown on the screen.
Network Status
Connection
Security
IP Address
Back Select
Signal ality
Signal ality
Signal Level
Infrastructure
Low High
Back Refresh
51
English
Continued on next page.