Kodak VERITE Craft 6 - Google Cloud Print; Status; AirPrint

Direct Connect Time
The setting of the Disconnect time when no Direct Mode operation
is detected.
1 From the Control panel, navigate to
[Home > Setup > Direct Connect Time],
then press .
2 Press
to select Direct
Connect Time among the selection from
[Disconnect], [5 min], [10 min], [60
min] and [Unlimited].
3 Press
to confirm.
–
If you select [Unlimited], when the
mobile is connected by Direct Mode
until selecting [Disconnect] this unit
remains in the Direct Mode.
–
If you select [Disconnect], the Direct Connection will be
immediately terminated.
Setup
Wi-Fi Setup
Enable Wi-Fi
Device Setup
Back Select
Direct Connect Time
Direct Connect Time
Disconnect
10 min
60 min
Cancel Select
5 min
AirPrint
Enable or disable the AirPrint function.
1 From the Control panel, navigate to
[Home > Setup > AirPrint], then press
.
2 Press
to set [Enable] or
[Disable].
3 Press
to confirm.
Setup
Enable Wi-Fi
Device Setup
Direct Connect Time
Back Select
AirPrint
AirPrint
Disable
Cancel Select
Enable
Google Cloud Print™
You can set the Google Cloud Print™ settings.
Status
Display the connection status or registration status of the Google
Cloud Print™ service.
1 From the Control panel, navigate to
[Home > Setup > Google Cloud Print >
Status], then press .
2 The Google Cloud Print™ connection (or
registration) status and unit name will be
shown on the Menu display.
–
The [VeriteC6-XXXX] represents the
unit name of your unit.
3 Press to return to the previous
menu.
Google Cloud Print
Register
Enable/Disable
Back Select
Status
Google Cloud Print
Status
Not Configured
VeriteC6-XXXX
Back
The following table shows the Google Cloud Print™ service
registration and connection status of this unit.
Status Unit state
Not
Configured
Unit is not registered to the Google Cloud Print™
service.
The Google Cloud Print™ feature is not available.
Disabled The Google Cloud Print™ service has been
disabled.
The Google Cloud Print™ feature is not available.
(Unit is registered in the Google Cloud Print™
service.)
Not
Connected
Unit is not connected to use the Google Cloud
Print™ service.
The Google Cloud Print™ feature is not available.
(Unit is registered in the Google Cloud Print™
service.)
Connected Unit is connected to the Google Cloud Print™
service.
The Google Cloud Print™ feature is available.
(Unit is registered in the Google Cloud Print™
service.)
Disconnected Unit has been disconnected from the Google
Cloud Print™ service.
The Google Cloud Print™ feature is not available.
(Unit is registered in the Google Cloud Print™
service.)
Registration in
progress
Registration is in process to use the Google
Cloud Print™ service.
The Google Cloud Print™ feature is not available.
Registration should complete, please wait.
58
English
Continued on next page.