Scan in Mac
Run the Image Capture application. (Scanning with other
applications such as “Preview” is a very similar process.)
Simplified scan mode
In the “Simplified” scanner interface, follow these Steps:
1 Place the document you would like to scan on the scanner
glass.
2 Open Image Capture located in the Applications folder.
3 Select this unit from the list of devices.
4 Select the desired destination where the scanned document
is to be saved from the [Scan To] pop-up menu.
5 Click [Scan] to start scanning.
6 A preview will appear on your monitor when scanning is
completed.
Advanced scanning options
In the “Simplified” scanner interface, click [Show Details] if you
want to enter a detailed scan mode with more advanced options.
Kind:
Select the scan type from below:
●
Color
●
Black & White
●
Text
–
Choose “Color” to scan an object in Color.
–
Choose “Black & White” to scan an object in Grayscale (256 or
Thousands of grays).
–
Choose “Text” to scan text documents.
Resolution:
Select the scan Resolution from below:
●
75 dpi
●
100 dpi
●
150 dpi
●
200 dpi
●
300 dpi
●
600 dpi
●
1200 dpi
–
Select the [Use Custom Size] checkbox to enable the [Size]
fields to specify the width and height you want to scan. Select
pixels, inches or cm (centimeters).
Rotation Angle:
Set the number of degrees for the clockwise rotation of your
scanned image.
Auto Selection:
Choose one of the following from the [Auto selection] pop-up
menu.
[Off]
to normally select the object.
[Detect
Separate Items]
to automatically select and straighten the
objects you are scanning.
[Detect
Enclosing Box]
to include all the items on the scanner bed in
one image.
Scan To:
Select the desired destination where the scanned document is to
be saved.
Name:
Enter the name of scanned images. For multiple scans, the name
entered will be a part of incrementally named scans. For example,
enter “doc” and the names of the scanned images will be
“doc1.jpeg”, “doc2.jpeg” and so forth.
47
English
Continued on next page.
To Next Page
Loading...
