Kodak VERITE Craft 6 - Security

Security
You can confirm the current Security Algorithm for Wi-Fi.
1 From the Control panel, navigate to
[Home > Setup > Network Status >
Security], then press .
2 The Wireless Security
type is displayed.
[Open], [WEP-64], [WEP-128], [WPA/
WPA2-PSK] or [WPA2-PSK] will be
shown on the Menu display.
Network Status
Connection
Signal ality
IP Address
Back Select
Security
Security
WPA2-PSK
Back
IP Address
You can confirm current IP Address for the printer.
1 From the Control panel, navigate to
[Home > Setup > Network Status > IP
Address], then press .
2 [IP Address] is displayed on the screen.
–
The XXX.XXX.XXX.XXX represents the
IP Address of your unit.
Network Status
Connection
Signal ality
Security
Back Select
IP Address
IP Address
XXX.XXX.XXX.XXX
Back
MAC Address
You can confirm the printer's MAC Address.
1 From the Control panel, navigate to
[Home > Setup > Network Status > MAC
Address], then press .
2 [MAC Address] is displayed on the
screen.
–
The XX-XX-XX-XX-XX-XX represents the
MAC address of your unit.
Network Status
Signal ality
Security
IP Address
Back Select
MAC Address
MAC Address
XX-XX-XX-XX-XX-XX
Back
52
English
Continued on next page.