EasyManua.ls Logo

Kodak VERITE Craft 6 - Status Messenger Error Message appears; Paper handling; Pages are printed, but there are problems with:; - Print quality

Kodak VERITE Craft 6
87 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Status Messenger Error Message appears
»
Refer to “Check print status from your PC” on page 29.
» Refer to “Status messages, LCD messages and LED
behaviors” on page 75.
Paper handling
»
Refer to “Print media” on page 30.
» Refer to “Status messages, LCD messages and LED
behaviors” on page 75 (status message: Paper Jam).
Pages are printed, but there are problems with:
- Print quality
»
Refer to “Improving the print quality” on page 83.
Network problems
If you need additional help, the Funai Solutions Center offers the
most-up-to-date driver, manuals, the latest FAQs and
troubleshooting tips.
Visit our website at www.kodakverite.com/support
Alignment problems
If the following message is displayed on the LCD during alignment,
make sure whether the alignment pattern is a printing failure or not.
Cartridge Setup
Test scan failed.
Place test print on
lower right corner of
scanner, and close lid.
Back Scan
If the message is displayed repeatedly:
Load a unmarked blank plain (Letter or A4 size) paper. The unit
will read any markings on used paper, which could cause the
alignment error message to reappear.
Open the Ink Door, then remove and reinstall the Ink Cartridges.
»
Refer to “Cartridge Setup” on page 49.
74
English
Continued on next page.

Table of Contents

Other manuals for Kodak VERITE Craft 6

Related product manuals