KODERA CASTING C300A - Page 19

１８
⑥《Stamp/Inkjet》：Select the type of the marker to use.
⑦《Specified Number》：When 《Number of Specified》 at ② has been selected, set how many
times to mark on a wire at even intervals.
⑧《Print Interval》《Rear Print Point》：
When 《 Both Ends Marking》《Asynchronous Marking》 are selected, 《 Rear
Print Point》 is displayed.
When others are selected, display is changed to 《Print Interval》.
《Rear Print Point》：Setting point to print at the rear side.
（Distance from the rear side end of the wire.）
《Print Interval》：When 《Equally-Spaced Marking》 is selected at ①, Input the
interval of printing.
⑨《Standby Time》：Input the time from the stopping of the output power of the sign to the
marker to the beginning of the motion of C300A.
Items to be set and displayed
Stamp
Inkjet
Both ends
Marking &
Simultaneous
Marking
Both Ends
Marking &
Asynchronous
Marking
Equally-
Spaced
Marking &
Simultaneous
Marking
Equally-
Spaced
Marking &
Asynchronous
Marking
Front Print Point
-
○
○
-
Output Time
○
○
○
○
Marking Point
○
○
○
○
Specified Number
-
-
○
-
Print Interval
-
-
○
-
Rear Print Point
-
○
-
○
Standby Time
○
○
-
○
Both Ends
Marking &
Simultaneous
Marking
Both Ends
Marking &
Asynchronous
Marking
Equally-Spaced
Marking &
Simultaneous
Marking
Equally-Spaced
Marking &
Simultaneous
Marking
Front Print Point
-
○
○
-
Output Time
○
○
○
○
Marking Point
○
○
○
○
Specified Number
-
-
○
-
Print Interval
-
-
○
-
Rear Pring Point
-
○
-
○
Standby Time
-
-
-
-