Fault and Status Condition
System Monitoring LEDs and Functions
Communications
Status LED
High Engine Temperature (Warning)
High Engine Temperature (Shutdown)
Low Oil Pressure (Warning)
Low Oil Pressure (Shutdown)
Low Coolant Level/Aux (Shutdown)
Low Fuel (Level or Pressure)
User-Defined Digital Input 1 (Warning)
User-Defined Digital Input 1
(Shutdown)
User-Defined Digital Input 2 (Warning)
User-Defined Digital Input 2
(Shutdown)
User-Defined Digital Input 3 (Warning)
User-Defined Digital Input 3
(Shutdown)
User-Defined Digital Input 4 (Warning)
User-Defined Digital Input 4
(Shutdown)
User-Defined Digital Input 5 (Warning)
User-Defined Digital Input 5
(Shutdown)
ATS Position N (RSA III with ATS only)
ATS Position E (RSA III with ATS only)
ATS Available N (RSA III with ATS
only)
ATS Available E (RSA III with ATS
only)
ATS Test (RSA III with ATS only, Test
initiated at ATS)
ATS Test (RSA III with ATS only, Test
initiated at RSA)
ATS Fault (RSA III with ATS only, No
fault)
ATS Fault (RSA III with ATS only, With
fault)
Communication Status (Loss - Master)
Communication Status (Loss - Slave)
Note: SF = Slow Flash (once per second), FF = Fast Flash (five times per second)
Figure 82 RSA III System Monitoring LEDs and Functions