TP-6694 9/20 35
1.3.1 Status Event and Fault Specifications
The Factory-Defined Settings List contains all status events and faults with ranges and time delays including items that do not
have user adjustments.
Note:
The engine ECM may limit the crank cycle even if the controller is set to a longer time period.
Factory-Defined Settings List
Controller
Display
Message
Fault
Lamp
Warning
Shutdown
Write
Access
Display
SiteTech
GenSet
Mode
Always
Running
Stopped
Default
Time
Delay
(sec.)
Critically high fuel level
(diesel-powered models only)*
Fuel Level
Critically High
ECM diagnostics (multiple
inputs) †
ECM diagnostics (multiple
inputs) †
ECM faults (address conflict)
ECM faults (model mismatch)
High fuel level (diesel-powered
models only) *
* Function requires optional input sensors or is engine ECM dependent on some generator set models.
† ECM inputs are engine-manufacturer dependent.
‡ Changeable only by resetting the controller with a personality profile (SiteTech 1.4 or higher).
** Denotes the default parameter range. Typically, ranges for the NiCad battery topology are slightly wider. For more details, refer to the
battery charger operation manual.
ST- Short Term, LT- Long Term