TP-6694 9/20 29
* Function requires optional input sensors or kits or is engine ECM dependent on some generator set models.
†ECM inputs are engine manufacturer dependent.
‡ The Common Fault Shutdown includes the items marked X‡ in the Shutdown Function column.
Alarm silence, auto only (NFPA 110) or always
AlrmSilence: Auto Only or
AlrmSilence: Always
Aux. inputs 0- 5 VDC, 1 analog
(2 additional inputs available with I/O module option)
Aux. inputs 0- 5 VDC, 1 analog
(2 additional inputs available with I/O module option)
Auxiliary inputs, up to 3 digital
(2 additional inputs available with I/O module option)
Auxiliary inputs, up to 3 digital
(2 additional inputs available with I/O module option)
Battery charger 1 communication loss
Battery charger 2 communication loss
Battery charger fault * (* does not apply to charger
GM87448)
Battery charger identity conflict
Battery charger parameter mismatch
Common fault (includes ‡)
Default parameters loaded
Enclosure temperature: high shutdown
Enclsr Temp: High Shutdwn
Engine cooldown (delay) active
File system error (controller fault)
Input/output (module option board) communication
loss
Metering communication loss
Not in auto (master switch)
Locked rotor (failed to crank)
Volts xx- xx High Shutdwn
Undervoltage (each phase)
(Voltage) regulator communication loss