Kohler Decision-Maker 3000 Operation

58 TP-6694 9/20
Menu Summary List Continued (Legend: ● First level submenu, ○ second level submenu)
Voltage Regulator Menu
(DEC3000 before
Version 3.0.25)
Digital Inputs Menu
Analog Inputs Menu
Event Log Menu
 Enter Voltage Regulator?
(Yes or No) *
o Voltage Regulator
Adjust
o Exit Voltage Regulator
 DIn A1
 DIn A2
 DIn A3 (Reserved for
Enclosure Temperature: High
Shutdown on select Telecom
units only)
 AIn A1 (factory
reserved and not user
programmable)
 AIn A2
 AIn B1 (with I/O
Board)
 AIn B2 (with I/O
Board)
 See the section titled:
Controller Fault
Diagnostics for a list of
items that can appear in
Event Log
Volt Select Menu (DEC3000
Version 2.8.22 or higher, and
APM402)
Voltage Regulator Menu
(DEC3000 Version 3.0.25
or higher, and APM402)
 DIn B1 (with I/O Board)
 DIn B2 (with I/O Board)
 Volt Select: *
o 120/240 V 1 Ph
o 120/208 V 3 Ph
o 139/240 V 3 Ph
o 277/480 V 3 Ph
o 120/240 V 3 Ph
 Voltage Regulator Voltage
Adjust *
 Reset Voltage Regulator
Settings *
o Reset Voltage
Regulator?
Digital Outputs Menu
 DOut A1
 DOut B1 (with I/O Board)
 DOut B2 (with I/O Board)
 DOut B3 (with I/O Board)
 DOut B4 (with I/O Board)
 DOut B5 (with I/O Board)
Battery Charger 1 Menu
 Output Volts
 Output Amps
 Charger State
 Software Version
 Reduced Out
 Temperature
Compensation
Battery Charger 2 Menu
 Output Volts
 Output Amps
 Charger State
 Software Version
 Reduced Out
 Temperature
Compensation
* User-Defined (changeable) Menu Displays. Use SiteTech™ software to change other settings including User-Defined Menu Displays.
NOTE:
Some changes require activating the calibration or adjustment mode. Some displays may only appear when in the calibration or adjustment
mode. Refer to the section titled: Reviewing Menu Displays to activate the calibration or adjustment mode.

Kohler Decision-Maker 3000 Specifications

General

Brand	Kohler
Model	Decision-Maker 3000
Category	Controller
Language	English