Maintenance
Lubricating system
Fig. 69: Filling engine oil — right side
1
Dipstick 2 Filler neck
u Remove oil filling cap.
u Fill with oil up to “max.” mark on the dipstick 1.
Information
Depending on application, some dipsticks have markings ("stopped" / "started").
Check the oil level on the "stopped" side.
u Clean oil filling cap, place on the filler neck and tighten by hand.
u Start the engine.
u Check oil pressure (engine oil pressure display unit) and check oil filter for leaks.
u Shut down the engine.
u After 2 to 3 minutes, check oil level on the dipstick. (For more information see:
5.9.3 Checking the engine oil level — SL001, page 112.)
u Replenish if necessary.
122
© 2022 by Kohler Co. All rights reserved.
KD62V12 33521030301_8_1 EN_US 2022-09
To Next Page
Loading...
