Maintenance
Fuel system
Fig. 78: Fuel filters
1
Fuel filter 2 Filter head
Fuel filter removal
u Remove dust from sealing area.
u Open fuel filter 1 with filter ribbon spanner.
u Remove filter.
u Repeat procedure for all filters.
Fuel filter installation
u Remove dust from sealing area.
u Lubricate filter seal with engine oil.
u Screw fuel filter 1 in filter head 2 until it contacts base.
u Tighten filter by hand by 3/4 to 1 turn.
u Check for leaks and damage.
u Retighten if necessary.
u Bleed the fuel system.
5.11.4 Bleeding the fuel system
Refer to the generator set manual for more details.
5.11.5 Checking differential pressure — fuel pre-filter — SL005
Refer to the generator set manual for more details.
KD62V12 33521030301_8_1 EN_US 2022-09
© 2022 by Kohler Co. All rights reserved.
133
To Next Page
Loading...
