Control and operation
Filling lubricants and operating fluids
4 Control and operation
4.1 Filling lubricants and operating fluids
q Charge air is connected.
q Exhaust system is connected.
q Electrical power supply is ready.
q Fuel and cooling supplies are connected.
4.1.1 Lubricating oil
Filling
u Fill with lubricating oil according to “Maintenance” section. (For more information see:
5.9.6 Changing engine oil — SL101, SL121, page 118.)
Requirements
u Fill with approved lubricating oils and lubricating oil additives only. (For more information
see: 5.14.3 Approved lubricating oils and lubricating oil additives, page 147.)
4.1.2 Coolant
Filling
Refer to the generator set manual for more details.
Requirements
u Fill with approved coolants only. (For more information see: 5.14.4 Approved coolants,
page 153.)
4.1.3 Diesel fuel
Filling
Refer to the generator set manual for more details.
Requirements
u Fill with approved diesel fuels, diesel exhaust fluids (DEF), and fuel additives only. (For more
information see: 5.14.2 Approved diesel fuels, diesel exhaust fluids (DEF), and fuel additives,
page 142.)
70
© 2022 by Kohler Co. All rights reserved.
KD62V12 33521030301_8_1 EN_US 2022-09
To Next Page
Loading...
