Control and operation
Dismantling
4.6 Dismantling
The dismantling must be carried out or supervised by a trained and qualified staff.
Prepare the dismantling as follows:
u According to local regulations, clarify the means and quality of the dismantling process.
u Disconnect the electrical power supply.
u Remove any electronic control or electrical connections.
u Drain all fluids.
u Remove any coolant, lubricants and fuel connections.
u Collect and dispose of waste, coolant, lubricants and fuel.
u Disassemble the component or engine according to general mechanics procedures.
76
© 2022 by Kohler Co. All rights reserved.
KD62V12 33521030301_8_1 EN_US 2022-09
To Next Page
Loading...
