Kohler KD62V12 Operation And Maintenance Manual

Maintenance
Inspection and maintenance schedules
Task identification
Component
Schedule
Service
Type
Task description
Time limit (h) Calendar limit (year) Replacement Overhaul
Inspection/Clean Repair/Adjustment
Without centrifugal oil filter
SL101
Engine oil filters
standard
250 2Y X
Replace filters. Clean the seal area before removal
the old filter to prevent oil contamination. (For more
information see: 5.9.4 Changing oil filters — SL101,
page 113.)
SL121
Engine oil change
with engine oil
“Category 2”
250 2Y X
Oil change maximum interval. Note: Replace engine
oil at least every 2 years. Final engine oil interval
depends on exchange interval factor according to
engine oil category and fuel sulfur rate. 0<fuel
sulfur rate<0.5%: the factor is 1 (no change on the
engine oil change interval). 0.5<fuel Sulfur rate<1%:
the factor is 1/2 (reduce by 2 times the engine oil
change interval and use only engine oil category 2
or 3). 1<fuel sulfur rate <1.5%: requires additional
approval. No oil Category 1 in case of K175. (For
more information see: 5.9.6 Changing engine oil —
SL101, SL121, page 118.)
Engine oil change
with engine oil
“Category 3”
500 2Y X
With centrifugal oil filter
SL101
Engine oil filters
standard
500 2Y X
Replace filters. Clean the seal area before removal
the old filter to prevent oil contamination. (For more
information see: 5.9.4 Changing oil filters — SL101,
page 113.)
SL102
Centrifugal oil
filter - paper filter
500 2Y X
Replace the paper (sleeve) for sludge at each oil
change. Measure and record thickness of the
sludge accumulated on paper if above limits.
Reduce engine oil interval if the sludge accumu‐
lated is above limits. (For more information see:
5.9.5 Replacing centrifuge paper filter — SL102,
page 114.)
SL121
Engine oil change
with engine oil
“Category 2”
250 2Y X
Oil change maximum interval. Note: Replace engine
oil at least every 2 years. Final engine oil interval
depends on exchange interval factor according to
engine oil category and fuel sulfur rate. 0<fuel
sulfur rate<0.5%: the factor is 1 (no change on the
engine oil change interval). 0.5<fuel Sulfur rate<1%:
the factor is 1/2 (reduce by 2 times the engine oil
change interval and use only engine oil category 2
or 3). 1<fuel sulfur rate <1.5%: requires additional
approval. No oil Category 1 in case of K175. (For
more information see: 5.9.6 Changing engine oil —
SL101, SL121, page 118.)
Engine oil change
with engine oil
“Category 3”
500 2Y X
KD62V12 33521030301_8_1 EN_US 2022-09
© 2022 by Kohler Co. All rights reserved.
85

Kohler KD62V12 Specifications

General

Brand	Kohler
Model	KD62V12
Category	Engine
Language	English