Contents
2.6.5 Preventing electrical hazards
43
2.6.6 Preventing noise hazards
43
2.6.7 Preventing vibrations hazards
44
2.6.8 Preventing electro-magnetic hazards
44
2.6.9 Preventing falling risks
44
2.7 Personal Protective Equipment (PPE)
44
2.8 Accessible areas
46
2.8.1 Engine ready for use or in operation
46
2.8.2 Engine in commissioning — test run
47
2.8.3 Emergency stop
47
2.8.4 Signage recommendations
48
2.9 Prevent property damage
49
2.9.1 Safety instructions for engine control unit (ECU)
49
2.9.2 Alarm conditions
49
2.9.3 Safety instructions for the fuel system
50
2.9.4 Cleanliness standards and safety
51
2.10 Disposal and environment protection
52
3 Repair
54
3.1 Prevent property damage
54
3.2 Preparatory maintenance activities
55
3.3 Post maintenance activities
56
3.3.1 Spray painting
56
3.4 Covers
58
3.4.1 Vibration damper cover removal and installation
58
3.4.2 Battery charging alternator & PTO cover removal and installation
60
3.4.3 Cylinder head cover removal and installation
64
3.5 Rocker arms
68
3.5.1 Rocker arms - Valve clearance set (SL 204)
68
3.5.2 Inlet and outlet rocker arms removal and installation
75
3.5.3 Rocker arms housing removal and installation
81
3.6 Cylinder head
89
3.6.1 Removing and installing cylinder head
89
3.7 Driving gear
97
3.7.1 Power unit
97
12
© 2022 by Kohler Co. All rights reserved.
KD62V12 33525088601_8_1 EN_US
2022-09