Repair Service and Repair Manual
Charge air system
Fig. 175: Installing flap with actuator
u Assemble flap with actuator 19 and compensator 23 with screws 21, and new o-rings 17, 18.
u Install assembly with screws 21, 22.
u Install flange joints 20.
Fig. 176: Installing charge air lines
u Install compensator 13 with seals 2, screws 3, 11, 12, and nuts 1.
u Assemble pipe 6 with compensators 5, and seals 2 using screws 10, and nuts 4.
u Install assembly to charge air cooler with screws 11 and seal 2.
u Install assembly to turbocharger with screws 3, seal 2, and nuts 1.
154
© 2021 by Kohler Co. All rights reserved.
KD83V16 33525088901_2_1 EN_US
2021-07
To Next Page
Loading...
