KONE Maintenance Method
MX10 / MX20 MCP Procedures - ASME A17.1-2013 / CSA B44-13
© 2014 KONE Corporation PSK8-604-MX10/MX20
All rights reserved.
47 (-) 2014-12-15
8.6.4.17: Ascending Overspeed and Unintended Movement Device
Procedure Note
• Manually operate all components to ensure
proper operation.
• Lubricate all pivot points, gears, bushings and
bearings, as required.
• For units equipped with the Hollister-Whitney
Rope Gripper refer to Document ID OM-
01.03.090.
For manufacturer specific instructions
refer to the OEM document included in
the Maintenance Control Program
documentation.
To Next Page
Loading...