Kongsberg Simrad AP11 - CDI35 Course Detector Interface; RF300 Rudder Feedback Unit

Instruction manual
20220513E 97
Temperature range:
Operation: ...........................0 to +55°C (+32 to + 130°F)
Storage: ................................–30 to +80°C (–22 to +176°F)
Environmental Protection:.......... IP56
Mounting: .................................... Deck or bulkhead
Material: ...................................... Black ABS
6.6 CDI35 Course Detector Interface
Supply and output:...................... Polarity independent 2-wire supply with
superimposed pulse width modulation
Automatic Performance:
Calibration:..........................Automatically activated by control head
Gain compensation: ...........Automatically adjusted continuously
Repeatability: .............................. ± 0.5 degrees
Accuracy: ..................................... ± 0,5°(not including errors from course detector)
Cable supplied: ............................ 15 m TP shielded cable
Dimensions: ................................. 160 mm x 126 mm (6.3 in x 5 in.)
Weight: ........................................ 0,9 kg including cable (2,0 lbs.)
Power consumption: .................... 0,9 watts
Temperature range:
Operation: ...........................0 to +55°C (+32 to + 130°F)
Storage: ................................–30 to +80°C (–22 to +176°F)
Environmental Protection:.......... IP56
Mounting: .................................... Deck or bulkhead
Material: ...................................... Black ABS
6.7 RF300 Rudder Feedback Unit
Rudder angle: .............................. +/- 90 degrees
Output signal: ............................. Polarity independent variable frequency
Frequency resolution: Center: 3400 Hz, 20 Hz/degree of change
Linearity:..............................+/- 3 degrees up to 45 degrees of rudder
Power consumption: .................... 0.3W