3.6 Details of quality adjustment items
3
AccurioPress C2070/C2070P/C2060/C3080/C3080P/C3070, AccurioPrint C2060L/C3070L 3-72
5 Check that each item is set as shown below.
% To periodically perform density adjustment using Relay Unit RU-509/Relay Unit RU-518 or Intel-
ligent Quality Optimizer IQ-501, set the [Periodical Adj. Execution] to [ON].
6 Press [Next].
7 When Intelligent Quality Optimizer IQ-501 is not mounted on the machine, check that [Switch
Color(1st or 2nd)] is set as shown below as necessary.
% To prioritize the image quality: [Precise]
This function adjusts both the primary colors (CMYK) and secondary colors (RGB).
% To reduce the paper consumption for color density control: [Standard]
This function only adjusts the primary colors (CMYK).
When Intelligent Quality Optimizer IQ-501 is mounted on the machine, [Precise] is always set.
Item Description
[Use Color Density Control] [ON]
[Periodical Adj. Execution] [ON]
[Adjustment Execution Timing] [Before Job Start] (Available when you
want to prioritize the hue standardiza
-
tion in a single job)
[During Job Runs] (Available when you
want to prioritize the hue standardiza
-
tion among multiple jobs)
[Chart Tray Setting] [OFF]
To Next Page
Loading...
Need help?
General
