To Next Page

To Previous Page

AccurioPress C2070/C2070P/C2060/C3080/C3080P/C3070, AccurioPrint C2060L/C3070L 3-5

3.4 Adjustment flow to use a new type of paper

3.4.1 Adjustment timing

- When you use a new type of paper

- When this machine cannot reproduce colors, although you perform the daily maintenance flow (high

accuracy)

3.4.2 Adjustment sequence

- When an RU optional unit (Relay Unit RU-509/Relay Unit RU-518) is not mounted

- When an RU optional unit (Relay Unit RU-509/Relay Unit RU-518) is mounted

Tips

- If you use [Package Color Auto Adj.], this machine automatically performs these adjustments.

To use [Package Color Auto Adj.], mount Intelligent Quality Optimizer IQ-501 on the machine. For de-

tails, refer to page 3-103.

- If you suspend the flow, perform Gamma Automatic Adjustment and then restart the flow.

- Adjustment 4 is set to Exact Color by default.

To switch this adjustment to G7 calibration, contact your service representative.

Ad-

just-

ment

order

Adjustment item Reference

1 [Gamma Automatic Adjustment] page 3-9

2-a [Density Balance Auto. Adj.] page 3-39

2-b [Density Balance Adjustment] (for i1Pro, i1Pro2, or i1iSisXL) page 3-11

2-c [Density Balance Adjustment] (for FD-5BT) page 3-21

3 Controller Calibration page 3-76

4-a Exact Color page 3-83

4-b G7 Calibration page 3-94

Ad-