Konica Minolta AccurioPrint C2060L Daily Maintenance Guide

3.5 Adjustment Flow when changing the screen
3
AccurioPress C2070/C2070P/C2060/C3080/C3080P/C3070, AccurioPrint C2060L/C3070L 3-6
3.5 Adjustment Flow when changing the screen
3.5.1 Adjustment timing
When the screen is changed
Tips
- This adjustment is the same as the adjustment when the machine was introduced (setup).
3.5.2 Adjustment sequence
- When an RU optional unit (Relay Unit RU-509/Relay Unit RU-518) is not mounted
- When an RU optional unit (Relay Unit RU-509/Relay Unit RU-518) is mounted
Tips
- If you use [Package Color Auto Adj.], this machine automatically executes step 2 and after. To use
[Package Color Auto Adj.], mount Intelligent Quality Optimizer IQ-501 on the machine. For details,
refer to page 3-103.
- Adjustment 5 is set to Exact Color by default. To switch this adjustment to G7 calibration, contact your
service representative.
- For "Color Density Control setting check", we recommend that you select [Each Paper Type Color Adj.]
to use special paper or increase the accuracy of the automatic adjustment.
Ad-
just-
ment
order
Adjustment item Reference
1 Custom Screen Setting page 3-7
2 [Gamma Automatic Adjustment] page 3-9
3-a [Density Balance Adjustment] (for i1Pro, i1Pro2, or i1iSisXL) page 3-11
3-b [Density Balance Adjustment] (for FD-5BT) page 3-21
4 Controller Calibration page 3-76
5-a Exact Color page 3-83
5-b G7 Calibration page 3-94
Ad-
just-
ment
order
Adjustment item Reference
1 Custom Screen Setting page 3-7
2 [Gamma Automatic Adjustment] page 3-9
3-a [Density Balance Auto. Adj.] page 3-39
3-b [Density Balance Adjustment] (for i1Pro, i1Pro2, or i1iSisXL) page 3-11
3-c [Density Balance Adjustment] (for FD-5BT) page 3-21
4 [Color density manual control] page 3-73
5-a Exact Color page 3-83
5-b G7 Calibration page 3-94

Konica Minolta AccurioPrint C2060L Specifications

General

Brand	Konica Minolta
Model	AccurioPrint C2060L
Category	Printer
Language	English