2.1 What is Both Sides Adjust?
2
AccurioPress C2070/C2070P/C2060/C3080/C3080P/C3070, AccurioPrint C2060L/C3070L 2-2
2 Both Sides Adjust
2.1 What is Both Sides Adjust?
When performing 2-sided printing, you need to correct the misalignment between the Front and Back sides
in order to align the printing positions of both sides. This operation is referred to as "both-sides adjustment".
The periodical both-side adjustment is required to help ensure stable both-side accuracy against a change
in machine conditions or a change in both-side accuracy that is caused depending on paper.
Understand the both-side adjustment flow (which timing, which both-side adjustment, in what order), and
then make adjustment as needed.
This machine provides the following three types of both-side adjustment flows:
Type of adjustment flow Adjustment timing
Adjustment flow to use paper of a new brand,
weight, or size
When you use paper of a new brand, weight, or size
Regular adjustment flow When you have changed paper (brand, weight, or
size) in a tray
Adjustment flow for each job • Just before a job with important both-side ac-
curacy is output
• Just before a job with a wide printing area is
output
• When both-side accuracy is not desirable (you
want to increase both-side accuracy)
To Next Page
Loading...
Need help?
General
