3
Layout and installation
3-18 bizhub 131f/190f
3.5.2 Getting started
In some countries you are required by law to indicate your name and fax
number on every fax you send.
You must therefore store your name (or company name) and fax number in
your machine before using it.
Every fax page you send arrives at the receiving machine with a single line of
text at the very top of the page. This text lists a name, called the Transmit
Terminal Identifier (TTI), and a fax number.
In "Entering initial settings" below, you can stored the following items in-
cludes your name and fax number registration.
- Language on the LCD and lists
- Current date and time
- Fax reception mode
- Dial tone detection
- Your fax number
- TTI 1/TTI 2/TTI 3
- Usual TTI
- Idle time for switching to the Energy save mode
These settings you make here can always be changed later.
3.5.3 Entering Initial settings
If you press [Reset] during Initial setup, your machine returns to standby
mode. But it will keep the settings you saved by pressing [Enter] as described
in these instructions.
1 Switch to the Fax mode by pressing the "Copy/Fax/Scan" button.
Language
2 Press [Menu], [9], [Enter].
The machine shows the current lan-
guage setting.
3 Press [,] or [+] until the language you want appears.
Then press [Enter] to save the setting and continue.
To Next Page
Loading...
Need help?
General
