Konica Minolta bizhub 223 User Manual

bizhub 423/363/283/223 5-4
5.2 Print (SMB)
5
5.2 Print (SMB)
Configure settings for SMB printing.
A printer can be shared on the Windows network using the SMB protocol. The SMB printing allows a com-
puter to directly specify this machine running on the Windows network to print information.
To use SMB printing in the IPv6 environment, you must enable the direct hosting service.
To perform the SMB printing from a computer with Windows Vista/Server 2008/7 installed, you can perform
the name resolution using the LLMNR function even if DNS server is not present. To perform the name res-
olution especially in the IPv6-only communication environment under Windows Vista/Server 2008/7, it will be
convenient to enable the LLMNR function.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
d Reference
For details on how to install the printer driver, refer to the [User's Guide [Print Operations]].
5.2.1 [TCP/IP Settings]
Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-2.
[TCP/IP Settings]
[Print Setting]
IPv6 environment?
No Yes
Do you use the WINS server? [Direct Hosting Setting]
Yes No
[WINS Setting]
Do you send data to
Windows Vista/Server
2008/7?
No Yes
[LLMNR Setting]
Finish

Konica Minolta bizhub 223 Specifications

General

Print Speed	22 ppm
Print Resolution	600 x 600 dpi
Copy Speed	22 cpm
Printing Technology	Laser
Duplex Printing	Yes
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 kbps
Max Paper Size	A3
Connectivity	USB 2.0, Ethernet
Zoom Range	25% - 400%
Scan Speed (B&W)	20 opm
Scan Speed (Color)	20 opm
Fax Compatibility	Super G3
Paper Sizes	A4, A5
Operating System Compatibility	Windows, Mac OS