bizhub 423/363/283/223 5-16
5.7 Printing (Netware)
5
For NetWare 5.x/6 Novell Distributed Print Service (NDPS)
0 Before starting the NDPS setting, make sure that an NDPS broker and NDPS manager have already
been created and loaded.
0 Make sure that the TCP/IP protocol has been set on the NetWare server, an IP address of this machine
has been set, and this machine has already been started.
1 From the client, log in the NetWare file system with administrator authority.
2 Start NWAdmin.
3 Right-click the [Organization] and [Organization unit] containers for printer agent creation, and select
[NDPS Printer] from Create.
4 Enter a [NDPS Printer Name] in the [Printer Name] field.
5 Select [Create a New Printer Agent] in the [Printer Agent Source] field, and click [Create].
6 Confirm the printer agent name, and browse and register the NDPS manager in the [NDPS Manager
Name] field.
7 Set the [Gateway Types] to [Novell Printer Gateway], and register it.
8 In the [Configure Novell NDPS for Printer Agent] window, set the Printer to [(None)] and the port hander
to [Novell Port Handler], and register the settings.
9 Set the [Connection type] to [Remote (LPR on IP)] and register the setting.
10 For the host address, enter the IP address of this machine you have configured. Enter [Print] for the
printer name, and then press [Finish] to register the settings.
11 When printer driver registration windows appear, select [None] for each OS and finish the registration.
To Next Page
Loading...
Need help?
General
