What to do if my Konica Minolta bizhub 3301P displays 'Too many trays. Remove some. [58]'?
To resolve this, turn off the printer, unplug the power cord, remove the extra trays, connect the power cord, and then turn the printer back on.
How to fix 'Parallel port disabled [56]' on Konica Minolta bizhub 3301P Printer?
If the parallel port is disabled, set Parallel Buffer to Auto from the printer control panel.
How to fix 'Rear USB port disabled [56]' on Konica Minolta bizhub 3301P Printer?
If the rear USB port is disabled, set USB Buffer to Auto from the printer control panel.
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Monthly Duty Cycle | 50, 000 pages |
| Connectivity | USB 2.0, Ethernet 10/100/1000Base-T |
| Processor | 800 MHz |
| Memory | 256 MB |
| First Print Out Time | 6.5 seconds |
| Type | Monochrome Laser Printer |
| Supported Operating Systems | Windows, macOS, Linux |
| Print Speed | 33 ppm |
| Paper Capacity | 250 sheets |
| Supported Media Sizes | A4, A5, B5, Letter, Legal |
| Duplex Printing | Yes |
Steps for installing internal components like flash memory, fonts, and firmware.
Detailed steps for installing an optional card into the printer's controller board.
Step-by-step guide for installing optional paper trays into the printer.
Steps for obtaining and installing the printer driver on your computer.
Preparing and installing the printer on an Ethernet network.
Preparing, connecting, and configuring the printer for wireless networks.
Setting paper size/type, universal settings, standard bin, trays, and multipurpose feeder.
Instructions for printing documents and adjusting toner darkness.
Procedures to erase volatile and non-volatile memory from the printer.
Step-by-step instructions for replacing toner cartridges and imaging units.
Tips and best practices to prevent paper jams in the printer.
How to interpret printer messages and resolve common issues.
Steps to diagnose and solve basic printer problems like non-response or blank display.
Troubleshooting issues related to printer trays and paper feeding.
Resolving issues with print jobs not printing, slowing down, wrong paper/tray, incorrect characters, linking, collating, page breaks, and held jobs.
Troubleshooting steps when the Embedded Web Server cannot be accessed.
To Next Page
