12
Utility
12-20 C352
Utility Chapter 12
Fax Basic Screen Default Setting
Copy Screen
Fax Active Screen
Copy Initial Screen Setting
Parameter Description
Default Tab Specify settings for faxing. For details, refer to the Facsimile
Operations and the Network Facsimile Operations of the User’s
Guide.
Default Program
Address Book Default
Index
Address Type Symbol
Display
No. of Characters for
Dest. Display
Parameter Description Default Setting
Copy Operating Screen Select the screen that is displayed while printing.
•ON:
A copy job can be reserved by touching
[Program Next Job] in the screen with the
message “Now printing.”, which appears
during printing.
• OFF:
A copy job can be reserved while the Basic
screen in Copy mode is displayed.
OFF
Parameter Description
TX Display Specify settings for faxing. For details, refer to the Facsimile
Operations and the Network Facsimile Operations of the User’s
Guide.
RX Display
Description Default Setting
Specify the default display for the Basic screen in Copy mode.
•TYPE1:
Buttons for selecting functions and the current settings are
displayed in the Basic screen.
•TYPE2:
Some buttons for selecting functions are displayed in the Basic
screen, and the current settings are highlighted.
TYPE1
To Next Page
Loading...
Need help?
General
