Konica Minolta CS-2000 User Manual

44
Setting
3. Press either or key to select
[LENS] and then press
ENTER
key.
The MENU - SETUP – LENS (Lens type
selection) screen appears.
4. Press either or key to select
[CLOSE-UP].
When you removed the closeup lens, select
[STANDARD].
5. Press
ENTER
key.
When the lens type is set, the MENU - OPTION
screen appears again on the LCD.
By pressing
ESC
key, after the setting is
canceled the MENU - OPTION screen appears
again on the LCD.
Lens type setting is saved even after switching
OFF (O).
6. Press
ESC
key.
The MENU screen appears again on the LCD.
7. Press
ESC
key.
The MEAS screen appears again on the LCD.
OP TION
MENU
LE NS
S TA N DA R D
CL OSE - UP
US ER. CAL NON
LE NS C
- UP
MENU
OP TION
ND - F I L T E R NON
MEAS SNGL
UC00
SPD
N
r m
Ob s
2
˚
ND
No n
BL
on
LEN
C
-
U
cd
m
2
Lv
x
y
T01
SYNC
I n t
35. 93
0 . 3968
0 . 4060
OP TION
MENU
LE NS
S TA N DA R D
CL OSE - UP

Konica Minolta CS-2000 Specifications

General

Brand	Konica Minolta
Model	CS-2000
Category	Measuring Instruments
Language	English