Konica Minolta magicolor 7450 - Caster Base; Kit Contents

Caster Base
225
Caster Base
By installing the caster base, the printer can more easily be set up at different
locations.
Note
When using the caster base, attach the bottom lower feeder unit to the
caster base before attaching the lower feeder unit to the printer.
Kit Contents
1— Caster Base
2— Three fixed legs
3— Three mounting screws for fixed legs
4— Two adjusters
5— Four linking plates
6— Four mounting screws for linking plates
7— Three ground fittings
8— Three mounting screws for ground fittings
1
7
4
3
8
5
2
6