Konica Minolta magicolor 7450 - Windows Me;98 Se (PPD)

Selecting Driver Options/Defaults (for Windows)12
Windows Me/98SE (PPD)
1
Choose the driver’s properties as follows:
–
From the
Start
menu, choose
Settings
and then
Printers
to display
the
Printers
directory. Right-click the KONICA MINOLTA mc7450
PPD printer icon and choose
Properties
.
2
Select the
Device Options
tab.
3
Check that the installed options are correctly listed. If not, proceed with
the next step. Otherwise, continue with step 6.
4
From the
Installable options
list, select an option, one at a time, and
then select
Enable or Disable
from the
Change setting for:
menu.
!"
If
VMOption
is selected, select
256 MB
,
512 MB
,
768 MB
or
1024 MB
, according to the installed memory. The factory default
setting is
256 MB
.
5
Click
Apply
.
6
Select the default settings for your printer, such as the default media for-
mat you use, on the appropriate tabs.
7
Click
Apply
.
8
Click
OK
.