Configuration Menu Overview
65
!"
All factory default values are shown in bold.
JOB
TIME-
OUT
Settings
5 seconds-15 seconds-300 seconds
Specify the timeout interval for a print job being received.
ETHER-
NET
TCP/IP ENABLE
Settings
YES/NO
If YES is selected, TCP/IP is enabled.
If NO is selected, TCP/IP is disabled.
IP
ADDRESS
Setting
000.000.000.000
Set the IP address for this printer on the
network.
Use the Up, Down, Left, and Right keys
to specify the value.
If the IP address is manually specified,
DHCP/BOOTP is automatically set to
OFF
.
SUBNET
MASK
Setting
255.255.000.000
Specify the subnet mask for the network.
Use the Up, Down, Left, and Right keys
to specify the value.
DEFAULT
GATEWAY
Setting
000.000.000.000
Specify the IP address of the router if one
is on the network. Use the Up, Down,
Left, and Right keys to specify the value.
DHCP/
BOOTP
Settings
ON/OFF
Select whether or not the IP address is
automatically acquired.
If
ON is selected, the IP address is auto-
matically acquired.
If
OFF
is selected, the IP address is not
automatically acquired.
To Next Page
Loading...
