Parameters of each mode
44
CENTER KEY......................................................... [C-1…G9]
Specifies the key (note) that will be used as the center for
keyboard tracking.
You can also enter these values by double click, play-
ing a note on the external MIDI keyboard, and press
the [Enter] key of your computer.
VDF MG
The VDF MG applies modulation to the VDF. These parame-
ters are the same as for the PITCH MG of the OSC page.
☞ “PITCH MG” on page 40
VDF 2
These parameters are the same as for VDF 1.
☞ “VDF1” on page 43.
To Next Page
Loading...
