• Programmable – Supports up to 10 global presets, 10 mixer snapshot presets, and 10
mixer presets for each system preset.
• HDMI Support – HDR, CEC, 3D, Deep Color, x.v.Color™, 7.1 PCM, Dolby TrueHD,
DTS–HD.
Advanced and User-friendly Operation
• Wide Range of I/O Formats – Includes 2 HDMI inputs, 1 unbalanced stereo analog input
and 4 balanced analog audio inputs, 2 balanced analog audio outputs, 1 HDMI output, 1
HDBT output (DSP-62-UC only).
• 1 bi-directional USB plug and play (PnP) audio port. In addition to AUDIO IN/OUT, as a
result of HDBT, users can use the USB to connect a mouse, webcam, USB flash drive,
or any other USB device to the TX-590RX (for example) side and take control of the PC
that is connected to the DSP-62-UC.
• Reliable PoE (Power over Ethernet) Powering – Accepts power from a remote PoE
provider with optional mains powering from connected power adapter.
• Multi-Channel Processing – Provides DSP that enables simultaneous processing of all
input and output signals.
• Easy Installation – Compact DemiTOOLS® fan-less enclosure for surface mounting,
side-by-side mounting of 2 devices in a 1U rack space with the recommended rack
adapter or fit in a Kramer T-BUS.
• Easy, Cost-Effective Maintenance – LED indicators for main power, line in/out, mic in,
clipping, and HDMI input selection, enable easy local maintenance and troubleshooting.
Local firmware upgrade via the RS-232 port ensures lasting, field-proven deployment.
• Intuitive and Comprehensive Configuration and Control – Via a powerful, user-friendly
graphic interface, set volume (gain and attenuation) and DSP for each input; execute
routing and select line in, mic in, phantom power or line out on each port; configure
master level, and more. Users can control signal routing, volume and other basic
settings using API commands via RS-232 communication transmitted by a PC, touch
screen system or other serial controller.
Flexible Connectivity
• 2 HDMI inputs with selection buttons on the front panel.
• 1 unbalanced stereo audio source.
• 1 Type-B USB 2.0 bi-directional host port.
• 1 HDMI output (DSP-62-AEC only).
• 1 HDBT output (DSP-62-UC only) with bi-directional PoE.
• 4 mono-balanced audio inputs (mono or mic level).
• 1 3.5mm stereo balanced output for cellphone/laptop or temporary guest connection.
To Next Page
Loading...
