Kramer DSP-62-AEC

Kramer Electronics Ltd.
DSP-62-AEC, DSP-62-UC – Upgrading Firmware
51
Upgrading Firmware
Use the Kramer K-UPLOAD software to upgrade the firmware via the device’s RS-232 port
.
The latest version of K-UPLOAD and installation instructions can be downloaded from our
website at: www.kramerav.com/support/product_downloads.asp.
Note that in order to use the micro USB port, you need to install the Kramer USB driver,
available at: www.kramerav.com/support/product_downloads.asp.
15