Kramer DSP-62-AEC User Manual

Kramer Electronics Ltd.
DSP-62-AEC, DSP-62-UC – Mounting the Device
7
Mounting the Device
This section provides mounting instructions. Before installing, make sure that the environment
is within the recommended range.
• Operation temperature – 0C to 40C (32F to 104F).
• Storage temperature – -40C to +70C (-40F to +158F).
• Humidity – 10% to 90%, RHL non-condensing.
Caution:
• Mount the device before connecting any cables or power.
Warning:
• Ensure that the environment (such as maximum ambient temperature air flow) is
compatible for the device.
• Avoid uneven mechanical loading.
• Appropriate consideration of equipment nameplate ratings should be used for avoiding
overloading of the circuits.
• Reliable earthing of rack-mounted equipment must be maintained.
Mount the device in a rack:
• Use the recommended rack adapter
(see www.kramerav.com/product/DSP-62-AEC, or www.kramerav.com/product/DSP-62-
UC).
Mount the device on a surface using one of the following methods:
• Attach the rubber feet and place the device on a flat surface.
• Fasten a bracket (included) on each side of the device and attach it
to a flat surface. For more information, go to
www.kramerav.com/downloads/DSP-62-AEC
Or,
http://www.kramerav.com/downloads/DSP-62-UC
Mount the device inside a TBUS (for example, the TBUS-10XL):
• Use the designated TBUS frame, to mount device inside the TBUS-10XL
(see www.kramerav.com/downloads/TBUS-10XL).

Kramer DSP-62-AEC Specifications

General

Brand	Kramer
Model	DSP-62-AEC
Category	Recording Equipment
Language	English