Kramer DSP-62-UC - Page 36

Kramer Electronics Ltd.
DSP-62-AEC, DSP-62-UC – Processing Audio Signals
34
2. Click an in-out cross-point (for example, IN 2 input and OUT 1 L and R outputs). The
black cross-points turn green.
Figure 38: Matrix Page – In Cross-Points
3. Click any other cross-points (one input to output/s or several inputs to output/s).
Figure 39: Matrix Page – Multiple Input-Output Cross-Points
Selected inputs are routed to selected outputs.
You can also select an audio signal generator for testing.